Begadi PRO FNS HopUp-enhed egnet til Begadi MK16 Sport / FN Herstal SCAR-L
Begadi PRO FNS HopUp-enhed er perfekt til Begadi MK16 Sport / FN Herstal SCAR-L opgraderingsserie.
Opgrader dit airsoft-gear med Begadi PRO FNS HopUp-enheden, designet specifikt til Begadi MK16 Sport og FN Herstal SCAR-L. Denne hop-up-enhed sikrer præcis og stabil skudretning, hvilket giver dig en fordel på banen. Med nem installation og holdbar konstruktion er det den ideelle løsning for både nybegyndere og erfarne spillere. Gør dig klar til at dominere spillet med en opgradering, der virkelig gør en forskel!
Manufacturing and development:
The HopUp Unit we developed modernizes the entire HopUp system of the MK16 series to make it equal to current M4 systems. Most components of the unit are CNC machined from 7075 aluminum with a tolerance of 0.05mm. After production, an automatic control takes place via a laser, which checks all dimensions. Through this quality assurance, this HopUp Unit achieves a fit accuracy hardly comparable.
Precise adjustment of the HopUp:
The HopUp effect can be very finely adjusted via the large-dimensioned adjustment wheel with position indication. This leads to significantly more consistent shooting results. With the built-in O-ring, an adjustment due to vibrations is not possible. The surface of the adjustment wheel is designed very grippy, so an adjustment is possible even with dirty gloves.
System without limitation:
This HopUp system leaves nothing to be desired, it is compatible with normal 5mm as well as modern 7mm barrel windows and HopUp rubbers (AEG). We deliver a suitable tensioner for every wish.
The choice of barrel is also entirely up to you, normal AEG as well as hybrid barrels can be used
Our enclosed aluminum tensioners are equipped with one of the two rubbers, here you have a hard and a soft version available. We recommend using the soft (black) for rather lighter BBs. The red version is suitable for 0.40g + or for appropriate Buckings which have a flatter patch.
Improved Feeding & Compatibility:
The feed channel for the BBs is 0.4mm longer than the original HopUp Unit, making it compatible with significantly more magazines from different manufacturers
More energy with the same spring:
Through our extensive testing in advance, we were able to determine an average increase in energy of approximately 0.2 - 0.3 J. without any changes to the nozzle or spring.
Easy Assembly:
Our FNS is swapped 1:1 with the original plastic unit, installation instructions can be found below as a download.
No modifications to the gearbox are necessary, even the original Nozzle (21.50mm) can be kept in its length.
Easier disassembly:
Since our FNS is no longer connected to the receiver, it is possible to open the lower without loosening any screws. For this, the dial must be in position 4-5.
Delivery includes:
1x CNC HopUp Unit made of 7075 aluminum
1x Adjusting wheel made of 7075 aluminum with position indication (pre-assembled)
2x C-Clip for AEG and Hybrid barrels
1x HopUp arm (lever) on 7075 aluminum
2x pressure spring for HopUp arm
1x brass screw for HopUp arm
1x brass ring for barrel centering
1x spring for brass ring (barrel spring)
1x O-ring for brass ring
1x O-ring ½ as replacement for adjustment wheel
1x Tensioner for 5mm HopUp systems
1x tensioner for 7mm HopUp systems
1x adapter for normal rubber tensioner
2x rubber insert for tensioner - hard (red)
2x rubber insert for tensioner - soft (black)
Compatibility:
The FNS Unit is compatible with Begadi MK16 Sport / FN Herstal SCAR-L Upgrade series as well as Cyma CM.063 + CM.067 series. For SCAR versions distributed directly by Cybergun, please check if it is a Cyma production or not. For Cyma based versions the unit fits, for other manufacturers it is not compatible. (Cybergun also manufactures the SCAR series with other manufacturers)